Impedance Calculator

Table of Contents

This impedance calculator finds Z in rectangular and polar form from R and X, from |Z| and angle, from series or parallel R, L, and C, or from measured voltage, current, and power factor. Impedance is resistance’s AC big brother because it captures how resistors, inductors, and capacitors oppose current and shift it out of phase with voltage. The calculator also gives admittance, power factor, equivalent inductance or capacitance, resonance, Q, and bandwidth. In addition, an animated phasor, live voltage and current waveforms, and a frequency sweep make every result easy to see.

Impedance Calculator

Find impedance in rectangular and polar form from R and X, from |Z| and angle, from series or parallel R, L and C, or from measured voltage, current and power factor. Get admittance, power factor, equivalent L or C, resonance and Q, with an animated phasor, waveforms and a frequency sweep.

Z = R + jX  |  |Z| = √(R² + X²)  |  XL = 2πfL  |  XC = 1 / (2πfC)
Try an example
I know:
Known values
Positive for inductive, negative for capacitive.
Between −90° and +90°. Positive means inductive.
Leave a part blank if it isn't in the circuit.
Voltage across the load (line-to-neutral for one phase of a wye load).
Power factor:
Applied voltage and frequency (optional)
Adds current and P, Q, S for this impedance.
Turns the reactance into the inductance or capacitance that gives it.
Link copied. It opens this calculator with your inputs filled in.
Impedance
—
Magnitude |Z|
—
Angle θ
—°
Resistance R
—
Reactance X
—
Power factor cos θ
—
Admittance Y = G + jB
—
Equivalent L or C
—
XL and XC
—
Resonant frequency f₀
—
Quality factor Q
—
Bandwidth f₀ / Q
—
Current I
—
Power P · Q · S
—
Impedance in the complex plane
Voltage and current waveforms
Impedance vs frequency
Show step-by-step solution
    Formulas Rectangular: Z = R + jX. Polar: |Z| = √(R² + X²), θ = arctan(X / R); R = |Z| cos θ, X = |Z| sin θ. XL = 2πfL, XC = 1 / (2πfC).
    Series RLC: Z = R + j(XL − XC). Parallel RLC: Y = 1/R + j(ωC − 1/(ωL)), Z = 1/Y. Resonance: f₀ = 1 / (2π√(LC)). Q (series) = (1/R)√(L/C); Q (parallel) = R√(C/L); bandwidth = f₀ / Q.
    Admittance: Y = 1/Z = G + jB (siemens). From measurements: |Z| = V / I, θ = ±arccos(pf). Applied voltage: I = V / |Z|, S = V·I, P = I²R, Q = I²X (single-phase, or per phase).
    Results are for educational and preliminary reference only. Always verify against applicable project standards, AHJ requirements, and licensed engineering judgment.
    See more resources: FE and PE Electrical Guide

    How to Use the Impedance Calculator

    1. First, choose what you know: R and X, |Z| and angle, series R-L-C, parallel R-L-C, or V, I and power factor.
    2. Next, enter the values with their units. Reactance is positive for inductive loads, whereas it is negative for capacitive ones. Also, in the RLC modes, leave a part blank if it isn't in the circuit.
    3. Then add an applied voltage (optional) to get current, real power P, reactive power Q and apparent power S. In addition, you can change the frequency used to convert X into an equivalent L or C.
    4. Finally, click Calculate. As a result, you get Z = R + jX, |Z|∠θ, power factor, admittance, equivalent L or C, and for RLC circuits XL, XC, f₀, Q and bandwidth. Afterward, open Show step-by-step solution or use Print / Save as PDF.

    Impedance Formulas

    Because inductors and capacitors store energy, their opposition to current depends on frequency. As a result, impedance is a complex number, and these formulas connect its forms.

    • Rectangular and polar: Z = R + jX, |Z| = √(R² + X²), θ = arctan(X / R)
    • Reactance: XL = 2πfL and XC = 1 / (2πfC)
    • Series RLC: Z = R + j(XL − XC)
    • Parallel RLC: Y = 1/R + j(ωC − 1/(ωL)), then Z = 1 / Y
    • Resonance: f₀ = 1 / (2π√(LC)). Q (series) = (1/R)√(L/C), Q (parallel) = R√(C/L), bandwidth = f₀ / Q
    • From measurements: |Z| = V / I and θ = ±arccos(pf), so R = |Z| × pf and X = |Z| sin θ

    Also, for the SI definition of the ohm (1 Ω = 1 V/A), see the NIST SI units page for electric current.

    Impedance Calculator Examples

    Example 1: Series RLC at 60 Hz: R = 10 Ω, L = 50 mH, C = 100 µF

    Impedance calculator results for a series RLC circuit at 60 Hz: 10 − j7.68 Ω, 12.61 Ω at −37.5°, with the complex plane, waveforms and frequency sweep
    The impedance calculator solving the series RLC example at 60 Hz.

    1. First, XL = 2π × 60 × 0.05 = 18.85 Ω, and XC = 1 / (2π × 60 × 100 µF) = 26.53 Ω.
    2. Then Z = 10 + j(18.85 − 26.53) = 10 − j7.68 Ω = 12.61 Ω ∠ −37.5°, which is capacitive with a 0.793 leading power factor.
    3. Finally, resonance is f₀ = 1 / (2π√(0.05 × 100 µF)) = 71.2 Hz, with Q = 2.24. At 60 Hz, therefore, the circuit is below resonance, which is why it looks capacitive.

    Example 2: Load impedance measured at 240 V, 20 A, 0.8 pf lagging

    In this case, |Z| = 240 / 20 = 12 Ω and θ = arccos 0.8 = 36.9°, so Z = 9.6 + j7.2 Ω. At 60 Hz, then, the reactance equals an inductance of 7.2 / 377 = 19.1 mH. As a result, the load draws P = 3.84 kW, Q = 2.88 kVAR and S = 4.8 kVA.

    Impedance Tips for the FE/PE Exam and the Field

    • Keep the sign of X. Inductive is +j and capacitive is −j, so a lagging power factor means inductive.
    • Series vs. parallel resonance are opposites. Series resonance gives minimum impedance (maximum current). In contrast, parallel resonance gives maximum impedance (minimum line current).
    • Parallel circuits are easier in admittance. First add G and B, and then invert once.
    • Three-phase loads: for these, use line-to-neutral voltage and line current to get the per-phase wye impedance.
    • Need power? Then use the Power Triangle Calculator or the kW to Amps Calculator .
    FAQ

    Frequently Asked Questions

    What can this impedance calculator solve?

    It finds Z in rectangular and polar form from R and X, from |Z| and angle, from series or parallel RLC, or from measured voltage, current and power factor. In addition, it gives admittance, resonance, Q and bandwidth, and then shows every step.

    What is electrical impedance?

    Basically, impedance (Z) is the total opposition a circuit presents to alternating current. In other words, it combines resistance R with reactance X from inductors and capacitors: Z = R + jX, measured in ohms.

    How do I convert impedance between rectangular and polar form?

    First, from rectangular to polar: |Z| = √(R² + X²) and θ = arctan(X / R). Similarly, from polar to rectangular: R = |Z| cos θ and X = |Z| sin θ. For example, 3 + j4 Ω is 5 Ω ∠ 53.13°.

    What is the difference between inductive and capacitive reactance?

    Inductive reactance, XL = 2πfL, rises with frequency and makes current lag voltage. In contrast, capacitive reactance, XC = 1 / (2πfC), falls with frequency and makes current lead voltage. As a result, in series they partly cancel.

    How do I find the resonant frequency of an RLC circuit?

    Use f₀ = 1 / (2π√(LC)). At resonance, XL = XC, so the impedance is purely resistive. A series circuit then has minimum impedance, whereas a parallel circuit has maximum impedance.

    What is the Q factor?

    In short, Q measures how sharp the resonance is. For example, for a series RLC circuit Q = (1/R)√(L/C), and for a parallel circuit Q = R√(C/L). Also, bandwidth is f₀ / Q, so a higher Q means a narrower bandwidth.

    How do I calculate impedance from voltage, current and power factor?

    First, |Z| = V / I, and the angle is θ = arccos(pf), positive for lagging and negative for leading. Then R = |Z| × pf and X = |Z| sin θ.

    What is admittance?

    Admittance is the reciprocal of impedance, Y = 1 / Z = G + jB, measured in siemens. Also, conductance G and susceptance B make parallel circuits easy, because parallel admittances simply add.

    Related Calculators

    Next, try these related tools, since each one builds on the same ideas.

    Preparing for the FE or PE Electrical Exam?

    Get structured guidance from a licensed P.E. through the ShaiLearning FE & PE mentorship program. Join the waitlist, and explore the FE Electrical Guide and PE Power Guide.

    Results are for educational and preliminary reference only. Always verify against applicable project standards, AHJ requirements, and licensed engineering judgment.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Related posts you might like

    Ohm’s Law Calculator

    The Ohm’s law calculator solves for voltage, current, resistance, and power from any two known values. Ohm’s law is the

    Read More »

    Why Large Power is Transmitted at High-Voltage

    Electricity is rarely made where it is used. A high voltage transmission system makes it possible to reach all demand

    Read More »

    What are the 9 Knowledge Areas of the PE Exam and the Blueprint to Pass it

    The PE Power exam blueprint maps every topic NCEES tests on the PE Electrical and Computer: Power exam. If you

    Read More »